Engineering Data Sheet
 

	Engineering Data Sheet	26x32	26x40	26x50	26x65	26x80
General	Minimum Casing Thickness mm	12
	Casing Corrosion Alowance mm	3
	Maximum Impeller Diameter mm	260
	Maximum Dia of Solids Handled mm	2	3	3	5	6
	Maximum Working Pressure kgf/cm2	6
	Maximum Test Pressure kgf/cm2	10
	Minimum Liquid Temperature °C	0
	Maximum Liquid Temperature °C	+70
	Weight of Bare Pump kgs.	80	90	95	110	125
Shaft Diameter	At Impeller mm	19
	Under Sleeve mm	26
	Sleeve O.D. mm	35
	Between Bearings mm	35
	At Coupling mm	24
Bearing	Radial-Inboard	SKF 6306 or Equal
	Thrust-Outboard	SKF 6306 or Equal
	Bearing Span mm	135
	Shaft Overhang mm	160
	Lubrication	Oil Bath
Stuffing Box	Bore mm	51
	Depth mm	58
	Packing Size mm	8 x 8
	No. of Rings	4
	Distance End Stuffing Box to Nearest Obst. mm	65
Power Limits	At 1440 RPM HP	15
	At 1800 RPM HP	18
	At 2200 RPM HP	22
Pump Setting	Shaft End Play Maximum mm	0.08
	Shaft Runout at Stu. Box Face TIR mm	0.10
	Impeller to Casing Clearance mm	0.3 to 0.5
Flanges	C.I.	IS: 6392 - 1971 1N/mm2

Flange drilling corresponds to DIN ND-10.
Flanges can also be drilled to BS-10 Table-D, Table-F & ANSI B-16.5 lbs. Rating on request.

Click here to close the window