|
Engineering Data Sheet |
26x32 |
26x40 |
26x50 |
26x65 |
26x80 |
| General |
Minimum Casing Thickness mm |
12 |
| Casing Corrosion Alowance mm |
3 |
| Maximum Impeller Diameter mm |
260 |
| Maximum Dia of Solids Handled mm |
2 |
3 |
3 |
5 |
6 |
| Maximum Working Pressure kgf/cm2 |
6 |
| Maximum Test Pressure kgf/cm2 |
10 |
| Minimum Liquid Temperature °C |
0 |
| Maximum Liquid Temperature °C |
+70 |
| Weight of Bare Pump kgs. |
80 |
90 |
95 |
110 |
125 |
| Shaft Diameter |
At Impeller mm |
19 |
| Under Sleeve mm |
26 |
| Sleeve O.D. mm |
35 |
| Between Bearings mm |
35 |
| At Coupling mm |
24 |
| Bearing |
Radial-Inboard |
SKF 6306 or Equal |
| Thrust-Outboard |
SKF 6306 or Equal |
| Bearing Span mm |
135 |
| Shaft Overhang mm |
160 |
| Lubrication |
Oil Bath |
| Stuffing Box |
Bore mm |
51 |
| Depth mm |
58 |
| Packing Size mm |
8 x 8 |
| No. of Rings |
4 |
| Distance End Stuffing Box to Nearest Obst. mm |
65 |
| Power Limits |
At 1440 RPM HP |
15 |
| At 1800 RPM HP |
18 |
| At 2200 RPM HP |
22 |
| Pump Setting |
Shaft End Play Maximum mm |
0.08 |
| Shaft Runout at Stu. Box Face TIR mm |
0.10 |
| Impeller to Casing Clearance mm |
0.3 to 0.5 |
| Flanges |
C.I. |
IS: 6392 - 1971
1N/mm2 |